Labour hire licences: how a host checks one, state by state

Queensland, Victoria, South Australia and the ACT license labour hire. How a host checks a provider on each public register, and what to record when it does.

In short

A host checks a labour hire licence on the public register of the state or territory where the workers will work. Queensland, Victoria, South Australia and the ACT each license labour hire and publish a register, and each penalises a business that uses an unlicensed provider. Search by the provider’s name or licence number, make sure the business on the register is the one you deal with, check for conditions, suspensions and cancellations, and keep a record.

A host checks a labour hire licence on the public register of the state or territory where the workers will work. Queensland, Victoria, South Australia and the ACT each license labour hire and publish a register. Search by the provider’s name or licence number, make sure the business on the register is the one you are dealing with, check for conditions, suspensions and cancellations, and keep a record of the check.

This is general information, not legal advice. Whether an arrangement is labour hire, and whether a licence is needed, depends on each state’s law; Victoria’s definition changed on 1 October 2026.

Which states and territories license labour hire?

We found licensing schemes, each with a public register, in four places. Each puts a duty on the business that uses the workers, called the host or user, not only on the provider:

Labour hire licensing for hosts, as each regulator described it on 15 November 2026
WhereThe host’s dutyPenalty for using an unlicensed providerRegister
QueenslandA person “must not, without a reasonable excuse, enter into an arrangement with a provider for the provision of labour hire services to the person, unless the provider is the holder of a licence” (section 11)Up to 3,000 penalty units for a corporation; 1,034 penalty units or 3 years’ imprisonment for an individualRegister of Labour Hire Licences
VictoriaUnder the Labour Hire Licensing Act 2018, “hosts must only use licensed providers” (Labour Hire Authority)Penalties exceeding $660,000 for a corporation and $160,000 for an individualLabour Hire Licence Register
South AustraliaUsers of all labour hire must make sure their provider is licensed from 29 July 2026, with some temporary exemptions (SA.GOV.AU)Using an unlicensed provider means “you risk significant penalties” (SA.GOV.AU)CBS Public Register of licensees (how to search)
Australian Capital TerritoryA person “must not enter into an arrangement for the provision of labour hire services to the person unless the proposed provider of the labour hire services is the holder of a licence” (section 35)A civil penalty of up to 3,000 penalty units for a corporation and 800 for an individualWorkSafe ACT’s public register

South Australia’s penalties for providers that supply workers without a licence are “up to $140,000 for individuals and $400,000 for businesses”, according to Consumer and Business Services. If your workers are elsewhere, ask that state’s industrial relations regulator whether a scheme applies.

How do you check a provider on each register?

Queensland. The register lets you “search by business names, or by licence number”, with an asterisk as a wildcard for partial names, and an advanced search by location or industry. Open the licence number to see its details, including any conditions, and print a verification of labour hire licence. Check the suspended and cancelled lists too. Queensland’s guidance for users adds that “you cannot use a labour hire provider who has only made an application”.

Victoria. The Labour Hire Licence Register “lists all licensed labour hire providers in Victoria”, with filters to show licences that are expired, suspended, cancelled or refused. The Labour Hire Authority’s checklist for hosts asks you to confirm “that the company offering services is the same as the one listed on the Register”, to contact the provider’s nominated officer using the details on the register, and to “keep a record of these checks for reference”.

South Australia. Search the Consumer and Business Services public register, selecting “the licence type 'labour hire' to search by name or location”; licence numbers can be checked for their status. If a provider is waiting for its application to be finalised under a temporary exemption, SA.GOV.AU says you can ask for “the email acknowledging their application”.

The ACT. WorkSafe ACT publishes a public register of licence holders. It sends licensees a renewal notice four weeks before expiry, and a provider that supplies workers after its licence has expired contravenes section 33 of the Act.

Why isn’t a copy of the licence enough?

Because it can be wrong. Victoria’s Labour Hire Authority tells hosts: “Do not rely on paper documentation – it could be illegitimate or out of date.” Among the signs of licence fraud it lists are paper documents that can’t be checked and “any provider information that does not match the Labour Hire Licence Register”. The register is the record; a document from the provider is only its claim.

The opposite mistake happens too. Queensland’s register says a licence that appears on it “is an active licence regardless of the expiry date shown”, because a provider may keep working while a renewal is decided. Read the register, not the date on an old printout.

What about agents and intermediaries?

Ask who the provider is. SA.GOV.AU says that if you request workers from an agent or intermediary, “you can expect that they’ll give you the details, and licence number, of the labour hire provider where they sourced the workers”. In Victoria, an intermediary that obtains workers from a provider and supplies them to another business may itself be a host and, where the arrangement is wholly or principally for the provision of labour, also a provider that must hold a licence.

How often should a host check?

Before each new engagement, and again while the arrangement runs. A licence can be suspended, cancelled or given new conditions at any time. Victoria offers Follow My Providers, which notifies you of changes to a provider’s licence by email; elsewhere, set a date to search the register again.

A checklist for each provider

  • Identify where the workers will work, and whether that state or territory licenses labour hire.
  • Search the register by the provider’s licence number, or its name if you don’t have one.
  • Confirm the business on the register is the one you contract with, including its ABN and the people named.
  • Check the licence’s status, any conditions, and the suspended and cancelled lists.
  • Don’t accept a pending application unless a temporary exemption applies, as in South Australia.
  • Through an agent, get the actual provider’s name and licence number.
  • Save the result, the date and who checked it, or print the register’s verification where offered.
  • Set a date to check again, or subscribe to alerts where the register offers them.

How does Vendarity help?

In Vendarity a labour hire licence can be its own requirement for each provider, beside its insurance certificates. The provider uploads a copy through a private link with no account. Your reviewer records the licence number and expiry date, notes the register check in the review, and accepts it or requests changes with a reason. Once automatic reminders are on, Vendarity asks for the renewed licence before its expiry date, and the history shows who checked what and when.

Vendarity doesn’t search any labour hire register or receive its alerts: the register check stays with your team. Each register has a step-by-step guide under how to check a document, and recruitment and labour hire agencies shows the product for agencies.

Sources

  1. Labour Hire Licensing Act 2017, section 11 (in force) · Queensland Government · read
  2. I use labour hire providers · Labour Hire Licensing Queensland · read
  3. Register of Labour Hire Licences · Office of Industrial Relations (Queensland) · read
  4. Labour hire hosts · Labour Hire Authority (Victoria) · read
  5. Check a provider’s licence status (updated 14 July 2026) · Labour Hire Authority (Victoria) · read
  6. Check if a labour hire provider is licensed (updated 29 January 2026) · SA.GOV.AU · read
  7. Using labour hire (updated 30 July 2026) · SA.GOV.AU · read
  8. SA protects workers with tough new labour hire laws (12 August 2026) · Consumer and Business Services (South Australia) · read
  9. Labour Hire Licence · WorkSafe ACT · read
  10. Labour Hire Licensing Act 2020, section 35 (republication 6, effective 26 December 2025) · ACT Legislation Register · read
  1. Standards & regulations

    Workers compensation certificates of currency, state by state

    Each Australian state runs its own workers compensation scheme. What each certificate shows, and where NSW, Victoria, Queensland, SA and WA let you check cover.

    6 min read
  2. Standards & regulations

    Employers’ liability certificates in the United Kingdom

    UK employers must hold employers’ liability insurance of at least £5 million and display the certificate. What to check on a UK contractor’s EL certificate.

    4 min read
  3. Standards & regulations

    Using contractors? What safety regulators in five countries expect you to check

    You can’t contract out of safety duties. What regulators in the US, Canada, UK, Australia and New Zealand say, and the documents that record your checks.

    6 min read

Collect and review supplier documents in one place.

Free for up to 25 suppliers. No card needed.