Contractor compliance costs: what the contractor pays and what stays with the principal

Contractors pay for their own insurance and licences; the principal pays for checking. Which costs and risks can still land on the principal, with sources.

In short

The contractor pays for its own compliance: insurance premiums, licences, training and any scheme it joins. The principal pays for checking it: the time to collect and review documents, and any tool it uses. What the principal can’t hand over is the risk. Safety duties can’t be contracted out, a NSW principal may pay workers compensation for an uninsured subcontractor’s workers, and a host that uses an unlicensed labour hire provider faces penalties in Queensland, Victoria and the ACT.

The contractor pays for its own compliance: its insurance premiums, licences, training and any prequalification scheme it chooses to join. The principal pays for checking it: the time to collect and review the documents, and any tool it uses for that. What the principal can’t hand over is the risk. Safety duties can’t be contracted out, and some costs fall on the principal when a contractor’s cover or licence turns out to be missing.

This is general information, not legal advice. Who bears a cost depends on your contract and on the law where the work is done.

Who pays for the software is a different question, with two models: the principal pays for a tool, or each contractor pays to join a scheme. That comparison is on who pays for contractor compliance software. This article is about the compliance itself.

What does the contractor pay for?

Everything it must hold to do the work:

Costs that sit with the contractor
CostExample from the source
Workers compensation premiumsEmployers “must get workers compensation insurance from an authorised insurer” (business.gov.au)
Public liability, professional indemnity and other coverRequired by the contract, or by law for some occupations in some states and territories (business.gov.au)
A sole trader’s own coverWorkers compensation “doesn’t cover you” as a sole trader, so you need your own personal insurance (business.gov.au)
Licence feesIn the ACT, a labour hire provider’s application fee for 2026–27 is $3,461
Keeping the policy paidAAMI says that to get a certificate of currency, “your premium payments need to be up to date”

Asking for a certificate adds little to these costs: insurers issue them on request, and AAMI says that in most cases it emails one within 4 business hours.

What does the principal pay for?

  • The time to work out what each contractor must hold, and to write it into the contract and the request.
  • The time to collect each document, check it and record the decision, then do it again at every renewal.
  • Any tool it uses for that work, under whichever pricing model it chooses.
  • Any extra protection it asks for under the contractor’s policy. Connecticut’s Bulletin S-14 notes that to be covered, a certificate holder must be added by endorsement, and “in some cases, there may be a cost for such protection”. Who pays that is a matter for the contract.

Which costs can still land on the principal?

The ones that follow a gap. In NSW, icare’s fact sheet for employers says “a principal may be liable to pay workers compensation to workers employed by subcontractors if a subcontractor was required to have a policy and does not have one and there is a workplace injury”, and that “a principal contractor may be liable for their subcontractor’s unpaid premiums if they fail to check that their subcontractors are properly insured”. icare notes this applies only when the subcontractor is engaged for work relating to the principal’s business.

Labour hire works the same way. A business that uses an unlicensed provider is exposed, not just the provider:

  • Victoria. The Labour Hire Authority says “hosts must only use licensed providers”, and that a host that engages an unlicensed provider can face penalties exceeding $660,000 for a corporation. It adds that hosts “can be liable for a provider’s contraventions under workplace and migration law”.
  • Queensland. Under section 11 of the Labour Hire Licensing Act 2017, a person must not enter into an arrangement with an unlicensed provider, with a maximum of 3,000 penalty units for a corporation. It is a reasonable excuse that the provider was shown on the register as licensed when the arrangement was made.
  • The ACT. Section 35 of the Labour Hire Licensing Act 2020 sets a civil penalty of up to 3,000 penalty units for a corporation that engages an unlicensed provider.

In each case the defence is the same: a check made before the work started, and kept.

Can a contract move the risk to the contractor?

A contract can make the contractor hold, pay for and prove its insurance. It can’t move the principal’s safety duties: Safe Work Australia’s fact sheet says “WHS duties are not transferrable” and “cannot be contracted out to another party, such as a subcontractor.” Nor can a certificate change a policy: Bulletin S-14 says certificates “cannot be used to amend, expand or alter the terms of the underlying insurance policy”. The contract sets who pays; checking the documents is how the principal knows the contractor did.

How should a principal budget for it?

By volume, not by contractor. The checking work grows with the number of contractors, the documents each must hold and how often each renews. Count them once:

  • List your active contractors and group them by the work they do.
  • For each group, list the documents it must hold and how often each renews.
  • Multiply out the checks a year: most insurance certificates renew annually, licences on their own cycles.
  • Decide who checks each kind of document, and what they record.
  • Decide what happens when a document is missing: no start, a recorded exception, or a stop on new work.
  • Then compare the time with what a tool costs, if you are considering one.

How does Vendarity handle the cost?

In Vendarity the business that asks pays, under the plans on pricing. Suppliers and contractors use it free and need no account: they open a private link and upload, and a code sent to their email opens anything already sent. Your team keeps every decision: Vendarity records who accepted which document and when, and asks for renewals before expiry once automatic reminders are on.

Vendarity doesn’t run a prequalification scheme, charge contractors, check licence registers or decide what a contract should require. See how Vendarity works.

Sources

  1. Fact sheet: premium forms definitions (principal contractors) · icare (Insurance and Care NSW) · read
  2. Fact sheet: WHS duties in a contractual chain (March 2022) · Safe Work Australia · read
  3. Types of business insurance · business.gov.au (Australian Government) · read
  4. Labour hire hosts · Labour Hire Authority (Victoria) · read
  5. Labour Hire Licensing Act 2017, section 11 (in force) · Queensland Government · read
  6. Labour Hire Licence (application fee for 2026–27) · WorkSafe ACT · read
  7. Labour Hire Licensing Act 2020, section 35 (republication 6, effective 26 December 2025) · ACT Legislation Register · read
  8. Bulletin S-14: use of certificates of insurance (9 November 2010) · Connecticut Insurance Department · read
  9. Certificate of Currency request (business insurance) · AAMI · read
  1. Guides

    Additional insured or certificate holder: the difference

    A certificate holder receives information about a policy; an additional insured is covered by it. How each is created, what each gets, and how to check yours.

    5 min read
  2. Guides

    A reminder schedule that gets certificates renewed without chasing

    Time the first ask to when the renewal can exist, make replying easy, stop when it arrives and hand silence to a person. A schedule built on issuers’ own dates.

    5 min read
  3. Guides

    What to do when a contractor’s certificate expires mid-contract

    First find out whether the cover lapsed or only the paperwork. Then decide under the contract, record why and follow up. The steps, with their sources.

    5 min read

Collect and review supplier documents in one place.

Free for up to 25 suppliers. No card needed.